HOME PRODUCT Keg Washer & Filler Monobloc
Keg Washer & Filler Monobloc

Keg Washer & Filler Monobloc

The keg washer & filler monobloc has two washing stations and one filling head, allowing for the simultaneous cleaning of two kegs. This design improves efficiency and throughput compared to single-head keg washers, as it can clean two kegs in parallel.



Specification of Keg Washer & Filler 2-1

1 Size:W*L*H 1.25X1.40X1.59M
2 Net Weight 223KG
3 with slide or not No Yes
4 Packing Size (L*W*H) 1.55X1.41X1.45M
5 Gross Weight with Package 348KG
6 Capacity Washing part: 40-50pcs/h Filling part: 40-50pcs/h
7 Power According to user local power
8 Power port 3P+N+G
9 Heater way Steam Coiler Electrical Heater
10 Power consumption 2.0KW 15.5KW
11 (Main Material SUS304
12 Water tank material and volume SUS304  Single tank / Volume=100L (2pcs)
13 Motor type  SUS304 Pump
14 Temperature prode NTC
15 Temperature  control mode STC-200/ Korea Autonics TCN4M
16 Time setting way Siemens PLC1200
17 Connect type water inlet and drain outlet 1.5″ Tri-clamp Steam inlet DIN male fitting
18 Spear type A S D G
19 Keg type EURO DIN AMERICAN 20L-60Lkeg
20 Filling measurement type Flow Switch   Flow Meter  
21 Washing part inlet with pressure detection or not Yes   Yes  
22 Washing part outlet with the residual liquid detection or not Yes   Yes  
23 Washing working procedure Lock down → air purge/drain off → hot water washing→ air purge/drain off → caustic washing → air purge/to caustic tank → hot water 1 washing → air purge/drain off → hot water 2 washing → air purge/drain off →sanitizer sterilize →CO2 purge/to sanitizer tank→CO2 fill
24 Filling working procedur) Lock→ CO2 Fill→ Filling→Stop
25 Package Composite board boxes
26 Lead time 40 days