HOME
PRODUCT
Three-station Keg Washer with 3 tanks and 3 pumps
This keg cleaning machine has three cleaning heads or stations, allowing for the simultaneous cleaning of three kegs. This design improves efficiency and throughput compared to single-head or two-head keg washers, as it can cleanthree kegs in parallel.
Contact
E-mailAdvantages
|
 |
The three-head configuration of a keg washer allows for increased productivity in a brewery or any establishment that requires frequent keg cleaning. By cleaning three kegs simultaneously, it reduces downtime and improves the efficiency of the keg cleaning process.
Cleaning process of electric heating keg washer:
Lock down→ air purge/drain off → hot water 1 washing→ air purge/drain off → caustic washing → air purge/to caustic tank → hot water 2 washing → air purge/drain off →sanitizer sterilize → CO2 purge/to sanitizer tank→hot water 3 washing →CO2 purge/drain off→CO2 fill
Cleaning process of steam heating keg washer:
Lock down→ air purge/drain off → hot water 1 washing→ air purge/drain off → caustic washing → air purge/to caustic tank → hot water 2 washing → air purge/drain off →acid washing → air purge/to acid tank→hot water 3 washing →steam purge/drain off →steam sterilized → steam keep pressure sterilized→CO2 purge/drain off→CO2 fill
Parameter
 |
 |
Specification of Three-station Keg Washer
| 1 | Size:W*L*H | 1.83X1.20X1.67M | |||
| 2 | Weight | 306KG | |||
| 3 | with slide or not | No | Yes | ||
| 4 | Packing Size （L*W*H) | 1.98X1.40X1.45M | |||
| 5 | Gross Weight | 455KG | |||
| 6 | Capacity | Washing part: | 45-60pcs/h | ||
| 7 | Power | According to user local power (3 Phases 380V 50Hz) | |||
| 8 | Power port | 3P+N+G | |||
| 9 | Heater way | Steam Coiler | Electrical Heater | ||
| 10 | Power consumption | 3KW | 15KW | ||
| 11 | Main Material | SUS304 | |||
| 12 | Water tank material and volume | SUS304 Single tank / Volume=100L （3pcs） | |||
| 13 | Motor type and brand | SUS304 Pump Head | |||
| 14 | Temperature prode | NTC | |||
| 15 | Temperature control mode | STC-200 | |||
| 16 | Time setting way | Siemens PLC 200 Smart | |||
| 17 | Connect type | 1.5″ Tri-clamp | DIN male fitting | ||
| 18 | Spear type | A | S | D | G |
| 19 | Keg type | EURO DIN AMERICAN 20L-60Lkeg | |||
| 20 | Washing part outlet with the residual liquid detection or not | Yes | |||
Message
